Central Motor Vehicle Rules, 1989 - CHAPTER III - LICENSING OF DRIVERS OF MOTOR VEHICLES - Rules 48, 49 and 50

CHAPTER III
REGISTRATION OF MOTOR VEHICLES
Rules 44, 45, 46  and Rule 47

48. Issue of certificate of registration,- On receipt of an application under Rule 17 and after verification of documents furnished therewith, the registering authority shall, subject to the provisions of section 4, issue to the owner of the motor vehicle a certificate of registration in  form 23 or form 23 A, as may be specified by Notification issued by  the concerned State Government or Union Territory of Administration.

                Provided that where the certificate of registration pertains to a transport vehicle it shall be  handed over to the registered owner only after recording the certificate of fitness in form 38.

49. Registration records to be kept by the registering authority,- Every registering authority shall keep in form 24 a permanent register of motor vehicles registered by it under section 41 and of motor  vehicles of other States for which new registration marks are assigned by it under sub-section (2) of section 47 and shall also enter in such record under the respective registration numbers , all changes made with reference to the provisions  sub-section (10) or sub-section (14) of section 41, sub-section (5) of section 49, sub-section (6) of section 50,  sub-sections (1), (2), (3) and (5) of section 41, sub-sections (4) section 52, orders of suspension under section 53 and order of cancellation under section 54 and 55.

50. Form and manner of display of registration mark on motor vehicles,- (1) On or after the commencement of this rule, the registration mark referred to in sub-section (6) of section 41 shall be displayed both at the front and rear of all motor vehicles clearly and legibly in the form of security license plate of the following specifications, namely,-
                (i) the plates shall be a solid unit made of 1.0 mm aluminum confirming to DIN  1745/DIN 1783 or ISO 7591. Border edges and corners of the plates must have an embossed border. The plate shall be suitable for hot stamping and reflective sheet has to be guaranteed for imperishable nature for minumu 5 years. The fast coloring of legend and border to be done by hot stamping.

                (ii) the plate should bear the letters “IND” in blue color on the extreme left center  of the plate. The letter should be one fourth of the size of the letters mentioned in Rule 51 and should be buried into the foil or applied by hot stamping and should be integral part of the plate;


                (iii) each plate shall be protected against counterfeiting by applying chromium based hologram, applied by hot stamping. Stickers and adhesive labels are not permitted. The plate shall bear a permanent consecutive identification number of minimum seven digits, to be laser branded into the reflective sheeting and hot stamping film shall bear a verification inscription;

(i)            the plate shall be fastened with non-removable/ non-reusable snap lock fitting system on rear of the vehicle at the premises of registering authority;
The license plates with all the above specifications and the specified registration for a vehicle shall be issued by the registering authority or approved license plate manufacturer or their dealers. The Central Road Research Institute New Delhi or any of the agency authorised by the Central Government shall approve the license plate manufacturers to the above specification

1 comment:

  1. The is a path to determine info, blames, or instincts, airy usually introduces an portion about a settle. This tenet composition innate envisions the books’ environss rolling as they contemplate her energy. montana vehicle registration cost

    ReplyDelete

Ask your questions or add your valuable comments here.